SureTECH Adhesive Tapes - Tapes for Shop and Exhibition fitters


	Lathe slitting from 1mm up to 1.6m, and slit-rewinding services enable us to offer our products in slit roll form, to exactley the size you need.
	< Double-sided foam being slit to bespoke widths for OEM automotive body side mouldings


	Try before you buy dies. We use a plot-cutter to provide rapid samples without the expense of production dies.
	< Plotter Cutter producing prototype double-sided die-cuts ready to mount marine nameplates


	Simple or complex profiles and pads in small to medium volumes with inexpensive, long lasting tools.
	< Flat-bed press die-cutting double sided foam for mounting OEM automotive nameplates


	Multi-layer laminating, dual height and double sided die-cutting. Fast accuate and very cost effective for higher volumes.
	< Double-sided adhesive foam gaskets for mounting automotive interior components


	SureTECH are able to produce open-faced die-cuts. This presentation format enables the end user to apply adhesive profiles much faster.
	< OEM Automotive nameplate tapes produced in open face format


	Close tolerances on dimensional stability, quantity & waste removal are factored into all of our processes.
	< Double-sided foam gaskets for mounting & insulating back lit panels

High tack, low cost PET film with aggresive rubber based adhesive. For internal applications that require high initial bond strength. This product is typically used to adhere different plastics, shelf edging, temporary repairs and mounting posters and displays.

Physical Properties			Performance			Temperature
Thickness (mm)	Colour	Substrate (carrier)	Shear	Peel	Tensile	Minimum	Maximum Continuous (days/weeks)	Maximum (mins/hours)
0.157	clear	PET	very good	very good	very good	-20°C	40°C	60°C

High tack, low cost Polyethylene foam with aggresive rubber based adhesive. For internal applications that require high initial bond strength. This product is typically used to adhere different plastics, temporary repairs and mounting posters, displays and plastic moulded hooks. SL4551 is better suited to uneven or structured surfaces.

This product is also available in 19mm×19mm, 25mm×25mm, 31mm×31mm Pad format

Physical Properties			Performance			Temperature
Thickness (mm)	Colour	Substrate (carrier)	Shear	Peel	Tensile	Minimum	Maximum Continuous (days/weeks)	Maximum (mins/hours)
0.8mm	white	PE foam	very good	very good	fair	-20°C	55°C	70°C

Double Sided tissue with high performance solvent acrylic adhesive. This product is highly resistant to extremes of temperature, moisture and UV. It can be used both internally and externally for mounting posters and displays.

Physical Properties			Performance			Temperature
Thickness (mm)	Colour	Substrate (carrier)	Shear	Peel	Tensile	Minimum	Maximum Continuous (days/weeks)	Maximum (mins/hours)
0.1mm	natural	tissue	excellent	very good	-	-40°C	140°C	180°C

UPA 4002 is a very versatile double sided polyester tape. Suitable for internal and external applications this clear double sided tape has many applications within the shopfitting industry. Typically it can be found permanently attaching shelf edging strips, and structurally bonding components within light box and menu display applications.

Physical Properties			Performance			Temperature
Thickness (mm)	Colour	Substrate (carrier)	Shear	Peel	Tensile	Minimum	Maximum Continuous (days/weeks)	Maximum (mins/hours)
0.21	clear	polyester	very good	excellent	excellent	-40°C	130°C	160°C

The UPA 4000FM series combines high initial tack with superior bonding characteristics. It is constructed of a medium/high density closed cell polyolefin PE foam, with UV beam cured acrylic adhesive. Not only does UPA4000FM out perform traditional solvent based products it is also far more environmentally friendly.

This range is available in three thicknesses from 1mm to 3.2mm, black or white foam and a choice of paper liner for economy and filmic liner for ease of application

This product is also available in 19mm×19mm, 25mm×25mm, 31mm×31mm Pad format

	Physical Properties			Performance			Temperature
	Thickness (mm)	Colour	Substrate (carrier)	Shear	Peel	Tensile	Minimum	Maximum Continuous (days/weeks)	Maximum (mins/hours)
4100FM	1.0	white/black	PE foam	very good	excellent	good	-40°C	70°C	90°C
4160FM	1.6	white/black	PE foam	very good	excellent	good	-40°C	70°C	90°C
4320FM	3.2	white/black	PE foam	very good	excellent	good	-40°C	70°C	90°C

0.75mm thick magnetic pad laminated to our UPA4100FM adhesive. This provides a good combination of versatility and strength. Available as 19mm×19mm and 25mm×25mm.

Physical Properties			Adhesive Performance			Adhesive Temperature
Thickness (mm)	Colour	Substrate (carrier)	Shear	Peel	Tensile	Minimum	Maximum Continuous (days/weeks)	Maximum (mins/hours)
1.75	white/black	PE foam	very good	excellent	good	-40°C	70°C	90°C

A wide range of self adhesive hooks and hangers for retail display purposes.

Ref	Description	Ref	Description
SM-01	square	HK-01	hook
BM-01	butterfly	XM-01	wide
TM-01	T-shape	SM-02 flexi	flexi-tail

For more information please visit www.hooksnhangers.com

A double sided polyethene tape coated with an emulsion acrylic adhesive on the open side and a hot melt adhesive on the closed side. The Acrylic adhesive has bee formulated to remove cleanly from floor surfaces, while the hot melt adhesive is more aggresive and will adhere to difficult surfaces, such as carpet or tile backing. A lower coat weight is also available for less demanding applications.

Physical Properties				Adhesive Performance			Adhesive Temperature
Thickness (mm)	Colour	Substrate (carrier)	Elongation	Shear	Peel	Tensile	Minimum	Maximum Continuous
0.15	blue	polythene	215%	very good	excellent	good	-10°C	60°C
0.23	blue	polythene	280%	very good	very good	good	-10°C	60°C

General double-sided tapes | Magentic pads | Self adhesive hang tabs | NEC carpet tape